Back

Malligai / Gundumalli (Jasminum sambac Ait.): Botanical Name and Family (Oleaceae)

White Arabian jasmine (Jasminum sambac) flowers and buds among leaves
Photo: Dinkun Chen, CC BY-SA 4.0, via Wikimedia Commons

Malligai or Gundumalli (Jasminum sambac, also called Mogra or Arabian jasmine) is a fragrant, bushy shrub grown for its white flowers in Tamil Nadu and other warm parts of South India. It is planted from rooted cuttings during June to November and pruned once a year, and it flowers from about March to October. Older package-of-practices notes give flower yields of 8 – 9 t/ha under conventional management and about 12 t/ha under precision production.

Overview

Jasminum sambac is an evergreen shrub of the olive family, native to India and widely grown across tropical Asia. Its flowers are used fresh for garlands, hair adornment and temple offerings, and in the perfume industry for concrete and absolute, a waxy aromatic extract made with solvent. The plant does not set seed readily, so it is multiplied from stem cuttings. It is a commercial crop in the dry and semi-dry tracts of Tamil Nadu, where Ramanathapuram Gundumalli is a well known local type.

Scientific name Jasminum sambac Ait.
Family Oleaceae
Type Perennial flowering shrub, commercial flower and perfumery crop
Main growing regions in India Tamil Nadu (Gundumalli or Malligai) and other warm regions of South India
Planting season June to November
Flowering season March to October
Typical spacing 1.25 x 1.25 m (conventional, 6,400 plants/ha); 1.2 x 1.0 m (precision, 8,333 plants/ha)
Typical yield 8 – 9 t/ha flowers (conventional); about 12 t/ha (precision production)

Climate and Soil

Soil

Well drained loamy or red loamy fertile soil. Waterlogged soils should be avoided because they encourage root rot.

Climate

Warm summer, mild winter, moderate rainfall and sunny days. The crop does not tolerate frost.

Varieties

Ramanathapuram Local, Single Mogra, Double Mogra, Iruvatchi, Arka Aradhana.

  • Ramanathapuram Local (Gundumalli): the round-flowered type of Ramanathapuram district in Tamil Nadu, valued for its fragrance.
  • Single Mogra and Double Mogra: types with a single or a double whorl of petals.
  • Iruvatchi: a type with a short corolla tube and several rows of petals.
  • Arka Aradhana: a selection developed by ICAR-Indian Institute of Horticultural Research, Bengaluru.

Variety performance depends on the district. Check with the state agricultural university or KVK for recommended types and genuine planting material.

Propagation

Semi hard wood cuttings (15 – 20 cm long) are rooted in a nursery and the rooted cuttings are used for planting. Select cuttings from healthy, high flowering mother plants.

Land Preparation and Planting

Conventional planting

Soil is well pulverized upto a good depth. Rooted cuttings are planted at a spacing of 1.25 x 1.25 m (6400 plants/ha) during June to November in pits of 30 x 30 x 30 cm size.

Precision production technology

Main field preparation: Ploughing with chisel, disc, rotovator and cultivator and levelling with tractor drawn leveller. Pits of 45 x 45 x 45 cm size are dug.

Spacing: 1.2 x 1.0 m (8333 plants/ha)

Nutrient Management

Conventional nutrition

FYM @ 10 kg/pit is applied before planting. NPK @ 60:120:120 g/plant/year is applied in 2 equal splits during November (after pruning) and June-July along with 10 kg FYM per plant. These are typical older recommendations; follow soil test results and state recommendations.

Micronutrients

Foliar spray of 0.25% ZnSO4 + 0.5% MgSO4 + 0.5% FeSO4 (In case of expression of micronutrient deficiency, spraying should be done at fortnightly intervals until the chlorotic symptoms disappear)

Precision production: biofertilizers, media and fertigation

  • Biofertilizers: Soil application of 2 kg each of Azospirillum and Phosphobacteria per ha at the time of planting. It is to be mixed with 100kg of FYM and applied in pits.
  • Media consortia: 5kg FYM + 500g neem cake + 100g vermicompost are applied per pit at the time of planting.
  • Fertigation: 100% RDF (60:120:120g NPK/plant/year) as water soluble fertilisers [19:19:19, potassium nitrate (13:0:45) and Urea].
  • Biostimulants: Foliar spray of panchagavya 3% + humic acid 0.4% at monthly intervals.
  • Micronutrients: Foliar spray of FeSO4 @ 0.5% + ZnSO4 @ 0.5% at monthly intervals.

Irrigation

Provided immediately after planting followed by weekly irrigation depending upon weather conditions. Under precision production, irrigation is given once in 3 days through drip system, which saves water and allows fertigation.

Training and Pruning

Prune the bushes at 50 cm height from ground level during last week of November every year. Early pruning during Aug-Sep induces flower production during off-season (Nov-Feb). Pruning removes old and weak growth and renews flowering shoots, so do not skip it.

Weed Management

Keep the field free of weeds through shallow hoeing and mulching, particularly in the first year. Under precision production, mulching with sheets or crop residue between the drip lines also keeps weeds down.

Pests and Diseases

Good drainage, balanced nutrition, annual pruning and field sanitation limit most problems. Main pests are bud worm, blossom midge and red spider mite, along with nematodes. Main disease problems are yellowing of leaves, root rot and Alternaria leaf spot. Scout the field regularly, remove affected shoots and use biological options such as Pseudomonas fluorescens where recommended.

Main pests

  • Bud worm: caterpillars bore into flower buds. Collect and destroy damaged buds, use light traps and pheromone traps for monitoring, and use Bacillus thuringiensis or neem-based preparations in general terms.
  • Blossom midge: maggots damage the buds. Remove and destroy infested buds, keep the field clean and prune on time so that flushes are synchronised.
  • Red spider mite: builds up in hot, dry weather and causes bronzing of leaves. Avoid dust and water stress, and wash the foliage with a strong water jet or use neem-based preparations.
  • Nematode: test the soil for nematode infection. Neem cake in the planting pit, organic amendments, healthy planting material and crop rotation before planting help reduce it.

Main diseases

  • Yellowing of leaves: it is caused by 3 major factors viz., iron deficiency, nematode infection and root rot disease. Find the cause before treating it.
  • Root rot: avoid waterlogging, keep drainage good and apply biocontrol agents such as Trichoderma and Pseudomonas fluorescens to the soil.
  • Alternaria leaf spot: remove and burn affected leaves, avoid overhead irrigation late in the day, and apply Pseudomonas fluorescens to the soil and as a foliar application at monthly intervals after planting.

If a pest or disease crosses the economic threshold, use only products and doses recommended by the state agriculture department or local KVK, and observe the label waiting period.

Harvesting and Yield

Flowering season is March – October. Fully developed unopened flower buds should be picked in the morning. For concrete extraction, fully opened flowers are harvested.

Yield

  • Flowers: 8 – 9 t/ha (conventional management)
  • Concrete recovery: 0.14 – 0.19%
  • Precision production technology: 12 t/ha

Post-Harvest and Storage

  • Pick buds in the cool morning hours. Late picking reduces flower quality and, for extraction, the recovery of concrete.
  • Handle the buds gently and pack them loosely in clean baskets lined with a damp cloth or leaves; avoid pressing or heaping.
  • Send flowers to the market the same day, since jasmine buds open and lose quality quickly.
  • Flowers meant for concrete extraction are delivered to the extraction unit quickly while fully fragrant.

Frequently Asked Questions

When is Malligai (Gundumalli) planted?

Rooted cuttings are planted during June to November, in pits of 30 x 30 x 30 cm for conventional planting.

What is the spacing for Malligai?

The conventional spacing is 1.25 x 1.25 m (6,400 plants/ha). In the precision production system a spacing of 1.2 x 1.0 m (8,333 plants/ha) is used with drip irrigation and fertigation.

When should jasmine be pruned?

Prune the bushes at 50 cm above the ground in the last week of November every year. Early pruning in August – September induces off-season flowering (November – February).

What is the yield of Malligai per hectare?

Traditional practice notes give 8 – 9 t/ha of flowers under conventional management and about 12 t/ha under precision production, with concrete recovery of 0.14 – 0.19%.

Which months does Malligai flower?

The flowering season is March to October. Unopened mature buds are picked in the morning.

Monitoring Malligai with Satellite Data

Satellite crop monitoring from Map My Crop can help flower growers and plantation managers follow the vigour of jasmine blocks after pruning, identify patches under stress, schedule irrigation across drip zones and support yield estimation through the season. Explore Map My Crop products for field and plantation monitoring, and see our Mullai guide for the other major jasmine crop of Tamil Nadu.